Below there is a long line of fastening opputunities for Excellent ramp system. The different ways of fastening can be used individually or be combined if necessary.
Screws for thresholds:
This method is a simpel and easy fastening. It is recommendable for thresholds made of wood - and where the surface is not suitable for alternative fastenings. (Example: flooring with carpets, etc.)
Can be used beneath tiles and ramps on slick and clean surfaces - or as protection for surfaces of wood, parquetry, etc.
The stopper is mounted on the back-side of the tiles and ramps. It is inserted in the "tubes".
Can be used beneath tiles and ramps on slick and clean surfaces, where other fasteners can't be used. The adhesive tape makes it possible to stick on slick surfaces. It is very importante that the surface is cleaned before mounting the mounting pad. When mounting the ramp - press down on the ramp for at least 15 seconds - for best result. When correctly mounted - it is possible to remove the ramp for cleaning - leaving only the mounting pad attached to the surface. This makes the re-mounting of the ramp very easy.
The Expansion Guide is used for fastening of ramps outdoor, where the other fasteners are not suitable. The Expansion Guide is mounted in a "T" app. 10 cm from the ramp start (pointing towards the threshold, stair, etc.). The Expansion Guide is mounted by drilling Ø5 mm holes in the surface beneath the Expansion Guide. By using rawlplugs and screws the Expansion Guide is correctly fixed. The ramp is placed on top of the Expansion Guides allowing it to expand freely. The ramp can easily be removed for cleaning - leaving the Expansion Guides untouched.
The F-Lock is a specially designed lock for fastening of small ramps on surfaces of wood or concrete. Drill Ø5 mm holes - using the ramp as a template. Use rawlplugs and screws for correct fixing of the F-Lock. The F-Locks needs to be un-screwed before the ramp can be moved.
Special tape developed to fasten small ramps on all types slick of surfaces. It is important that the surface is cleaned before mounting the tape. When the ramp is mounted - press down in at least 15 seconds for best fastening sesult. The doubleadhesive tape will have to be replaced, if the ramp is moved for cleaning.